/*
 * Copyright (C) 2014 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * @addtogroup Media
 * @{
 */

/**
 * @file NdkMediaCodec.h
 */

/*
 * This file defines an NDK API.
 * Do not remove methods.
 * Do not change method signatures.
 * Do not change the value of constants.
 * Do not change the size of any of the classes defined in here.
 * Do not reference types that are not part of the NDK.
 * Do not #include files that aren't part of the NDK.
 */

#ifndef _NDK_MEDIA_CODEC_H
#define _NDK_MEDIA_CODEC_H

#include <stdint.h>
#include <sys/cdefs.h>

#include <android/api-level.h>

#include "NdkMediaCrypto.h"
#include "NdkMediaError.h"
#include "NdkMediaFormat.h"

__BEGIN_DECLS

struct ANativeWindow;
typedef struct ANativeWindow ANativeWindow;


struct AMediaCodec;
typedef struct AMediaCodec AMediaCodec;

struct AMediaCodecBufferInfo {
    int32_t offset;
    int32_t size;
    int64_t presentationTimeUs;
    uint32_t flags;
};
typedef struct AMediaCodecBufferInfo AMediaCodecBufferInfo;
typedef struct AMediaCodecCryptoInfo AMediaCodecCryptoInfo;


/**
 * Definitions of per-buffer flags for operation with NdkMediaCodec.
 *
 * The semantics of these enums match those of the same name
 * in {@link android.media.MediaCodec}.
 */
enum {
    /**
     * This indicates that the (encoded) buffer marked as such contains
     * the data for a key frame.
     *
     * Semantics are the same as {@link android.media.MediaCodec#BUFFER_FLAG_KEY_FRAME}
     */
    AMEDIACODEC_BUFFER_FLAG_KEY_FRAME = 1, // introduced in API 34
    AMEDIACODEC_BUFFER_FLAG_CODEC_CONFIG = 2,
    AMEDIACODEC_BUFFER_FLAG_END_OF_STREAM = 4,
    AMEDIACODEC_BUFFER_FLAG_PARTIAL_FRAME = 8,
    /**
     * This indicates that the buffer contains non-media data for the
     * muxer to process.
     *
     * Semantics are the same as {@link android.media.MediaCodec#BUFFER_FLAG_MUXER_DATA}
     */
    AMEDIACODEC_BUFFER_FLAG_MUXER_DATA = 16,  // introduced in API 34
    /**
     * This indicates that the buffer is decoded and updates the internal state of the decoder,
     * but does not produce any output buffer.
     *
     * Semantics are the same as {@link android.media.MediaCodec#BUFFER_FLAG_DECODE_ONLY}
     */
    AMEDIACODEC_BUFFER_FLAG_DECODE_ONLY = 32,  // introduced in API 34
};

enum {
    AMEDIACODEC_CONFIGURE_FLAG_ENCODE = 1,
    AMEDIACODEC_INFO_OUTPUT_BUFFERS_CHANGED = -3,
    AMEDIACODEC_INFO_OUTPUT_FORMAT_CHANGED = -2,
    AMEDIACODEC_INFO_TRY_AGAIN_LATER = -1,
};

/**
 * Called when an input buffer becomes available.
 * The specified index is the index of the available input buffer.
 */
typedef void (*AMediaCodecOnAsyncInputAvailable)(
        AMediaCodec *codec,
        void *userdata,
        int32_t index);
/**
 * Called when an output buffer becomes available.
 * The specified index is the index of the available output buffer.
 * The specified bufferInfo contains information regarding the available output buffer.
 */
typedef void (*AMediaCodecOnAsyncOutputAvailable)(
        AMediaCodec *codec,
        void *userdata,
        int32_t index,
        AMediaCodecBufferInfo *bufferInfo);
/**
 * Called when the output format has changed.
 * The specified format contains the new output format.
 */
typedef void (*AMediaCodecOnAsyncFormatChanged)(
        AMediaCodec *codec,
        void *userdata,
        AMediaFormat *format);
/**
 * Called when the MediaCodec encountered an error.
 * The specified actionCode indicates the possible actions that client can take,
 * and it can be checked by calling AMediaCodecActionCode_isRecoverable or
 * AMediaCodecActionCode_isTransient. If both AMediaCodecActionCode_isRecoverable()
 * and AMediaCodecActionCode_isTransient() return false, then the codec error is fatal
 * and the codec must be deleted.
 * The specified detail may contain more detailed messages about this error.
 */
typedef void (*AMediaCodecOnAsyncError)(
        AMediaCodec *codec,
        void *userdata,
        media_status_t error,
        int32_t actionCode,
        const char *detail);

typedef struct AMediaCodecOnAsyncNotifyCallback {
      AMediaCodecOnAsyncInputAvailable  onAsyncInputAvailable;
      AMediaCodecOnAsyncOutputAvailable onAsyncOutputAvailable;
      AMediaCodecOnAsyncFormatChanged   onAsyncFormatChanged;
      AMediaCodecOnAsyncError           onAsyncError;
} AMediaCodecOnAsyncNotifyCallback;

/**
 * Called when an output frame has rendered on the output surface.
 *
 * \param codec       The codec object that generated this notification.
 * \param userdata    The user data set at AMediaCodec_setOnFrameRenderedCallback.
 * \param mediaTimeUs The presentation time (media time) of the frame rendered.
 *                    This is usually the same as specified in
 *                    AMediaCodec_queueInputBuffer, but some codecs may alter
 *                    the media time by applying some time-based transformation,
 *                    such as frame rate conversion. In that case, presentation
 *                    time corresponds to the actual output frame rendered.
 * \param systemNano  The system time when the frame was rendered.
 */
typedef void (*AMediaCodecOnFrameRendered)(
        AMediaCodec *codec,
        void *userdata,
        int64_t mediaTimeUs,
        int64_t systemNano);

/**
 * Create codec by name. Use this if you know the exact codec you want to use.
 * When configuring, you will need to specify whether to use the codec as an
 * encoder or decoder.
 *
 * Available since API level 21.
 */
AMediaCodec* AMediaCodec_createCodecByName(const char *name) __INTRODUCED_IN(21);

/**
 * Create codec by mime type. Most applications will use this, specifying a
 * mime type obtained from media extractor.
 *
 * Available since API level 21.
 */
AMediaCodec* AMediaCodec_createDecoderByType(const char *mime_type) __INTRODUCED_IN(21);

/**
 * Create encoder by name.
 *
 * Available since API level 21.
 */
AMediaCodec* AMediaCodec_createEncoderByType(const char *mime_type) __INTRODUCED_IN(21);

/**
 * Delete the codec and free its resources.
 *
 * Available since API level 21.
 */
media_status_t AMediaCodec_delete(AMediaCodec*) __INTRODUCED_IN(21);

/**
 * Configure the codec. For decoding you would typically get the format from an extractor.
 *
 * Available since API level 21.
 */
media_status_t AMediaCodec_configure(
        AMediaCodec*,
        const AMediaFormat* format,
        ANativeWindow* surface,
        AMediaCrypto *crypto,
        uint32_t flags) __INTRODUCED_IN(21);

/**
 * Start the codec. A codec must be configured before it can be started, and must be started
 * before buffers can be sent to it.
 *
 * Available since API level 21.
 */
media_status_t AMediaCodec_start(AMediaCodec*) __INTRODUCED_IN(21);

/**
 * Stop the codec.
 *
 * Available since API level 21.
 */
media_status_t AMediaCodec_stop(AMediaCodec*) __INTRODUCED_IN(21);

/*
 * Flush the codec's input and output. All indices previously returned from calls to
 * AMediaCodec_dequeueInputBuffer and AMediaCodec_dequeueOutputBuffer become invalid.
 *
 * Available since API level 21.
 */
media_status_t AMediaCodec_flush(AMediaCodec*) __INTRODUCED_IN(21);

/**
 * Get an input buffer. The specified buffer index must have been previously obtained from
 * dequeueInputBuffer, and not yet queued.
 *
 * Available since API level 21.
 */
uint8_t* AMediaCodec_getInputBuffer(AMediaCodec*, size_t idx, size_t *out_size) __INTRODUCED_IN(21);

/**
 * Get an output buffer. The specified buffer index must have been previously obtained from
 * dequeueOutputBuffer, and not yet queued.
 *
 * Available since API level 21.
 */
uint8_t* AMediaCodec_getOutputBuffer(AMediaCodec*, size_t idx, size_t *out_size) __INTRODUCED_IN(21);

/**
 * Get the index of the next available input buffer. An app will typically use this with
 * getInputBuffer() to get a pointer to the buffer, then copy the data to be encoded or decoded
 * into the buffer before passing it to the codec.
 *
 * Available since API level 21.
 */
ssize_t AMediaCodec_dequeueInputBuffer(AMediaCodec*, int64_t timeoutUs) __INTRODUCED_IN(21);

/*
 * __USE_FILE_OFFSET64 changes the type of off_t in LP32, which changes the ABI
 * of these declarations to  not match the platform. In that case, define these
 * APIs in terms of int32_t instead. Passing an off_t in this situation will
 * result in silent truncation unless the user builds with -Wconversion, but the
 * only alternative it to not expose them at all for this configuration, which
 * makes the whole API unusable.
 *
 * https://github.com/android-ndk/ndk/issues/459
 */
#if defined(__USE_FILE_OFFSET64) && !defined(__LP64__)
#define _off_t_compat int32_t
#else
#define _off_t_compat off_t
#endif  /* defined(__USE_FILE_OFFSET64) && !defined(__LP64__) */

#if (defined(__cplusplus) && __cplusplus >= 201103L) || \
    __STDC_VERSION__ >= 201112L
#include <assert.h>
static_assert(sizeof(_off_t_compat) == sizeof(long),
              "_off_t_compat does not match the NDK ABI. See "
              "https://github.com/android-ndk/ndk/issues/459.");
#endif

/**
 * Send the specified buffer to the codec for processing.
 *
 * Available since API level 21.
 */
media_status_t AMediaCodec_queueInputBuffer(AMediaCodec*, size_t idx,
                                            _off_t_compat offset, size_t size,
                                            uint64_t time, uint32_t flags) __INTRODUCED_IN(21);

/**
 * Send the specified buffer to the codec for processing.
 *
 * Available since API level 21.
 */
media_status_t AMediaCodec_queueSecureInputBuffer(AMediaCodec*, size_t idx,
                                                  _off_t_compat offset,
                                                  AMediaCodecCryptoInfo*,
                                                  uint64_t time, uint32_t flags) __INTRODUCED_IN(21);

#undef _off_t_compat

/**
 * Get the index of the next available buffer of processed data.
 *
 * Available since API level 21.
 */
ssize_t AMediaCodec_dequeueOutputBuffer(AMediaCodec*, AMediaCodecBufferInfo *info,
        int64_t timeoutUs) __INTRODUCED_IN(21);

/**
 * Returns the format of the codec's output.
 * The caller must free the returned format.
 *
 * Available since API level 21.
 */
AMediaFormat* AMediaCodec_getOutputFormat(AMediaCodec*) __INTRODUCED_IN(21);

/**
 * If you are done with a buffer, use this call to return the buffer to
 * the codec. If you previously specified a surface when configuring this
 * video decoder you can optionally render the buffer.
 *
 * Available since API level 21.
 */
media_status_t AMediaCodec_releaseOutputBuffer(AMediaCodec*, size_t idx, bool render) __INTRODUCED_IN(21);

/**
 * Dynamically sets the output surface of a codec.
 *
 *  This can only be used if the codec was configured with an output surface.  The
 *  new output surface should have a compatible usage type to the original output surface.
 *  E.g. codecs may not support switching from a SurfaceTexture (GPU readable) output
 *  to ImageReader (software readable) output.
 *
 * For more details, see the Java documentation for MediaCodec.setOutputSurface.
 *
 * Available since API level 21.
 */
media_status_t AMediaCodec_setOutputSurface(AMediaCodec*, ANativeWindow* surface) __INTRODUCED_IN(21);

/**
 * If you are done with a buffer, use this call to update its surface timestamp
 * and return it to the codec to render it on the output surface. If you
 * have not specified an output surface when configuring this video codec,
 * this call will simply return the buffer to the codec.
 *
 * For more details, see the Java documentation for MediaCodec.releaseOutputBuffer.
 *
 * Available since API level 21.
 */
media_status_t AMediaCodec_releaseOutputBufferAtTime(
        AMediaCodec *mData, size_t idx, int64_t timestampNs) __INTRODUCED_IN(21);

/**
 * Creates a Surface that can be used as the input to encoder, in place of input buffers
 *
 * This can only be called after the codec has been configured via
 * AMediaCodec_configure(..); and before AMediaCodec_start() has been called.
 *
 * The application is responsible for releasing the surface by calling
 * ANativeWindow_release() when done.
 *
 * For more details, see the Java documentation for MediaCodec.createInputSurface.
 *
 * Available since API level 26.
 */
media_status_t AMediaCodec_createInputSurface(
        AMediaCodec *mData, ANativeWindow **surface) __INTRODUCED_IN(26);

/**
 * Creates a persistent Surface that can be used as the input to encoder
 *
 * Persistent surface can be reused by MediaCodec instances and can be set
 * on a new instance via AMediaCodec_setInputSurface().
 * A persistent surface can be connected to at most one instance of MediaCodec
 * at any point in time.
 *
 * The application is responsible for releasing the surface by calling
 * ANativeWindow_release() when done.
 *
 * For more details, see the Java documentation for MediaCodec.createPersistentInputSurface.
 *
 * Available since API level 26.
 */
media_status_t AMediaCodec_createPersistentInputSurface(
        ANativeWindow **surface) __INTRODUCED_IN(26);

/**
 * Set a persistent-surface that can be used as the input to encoder, in place of input buffers
 *
 * The surface provided *must* be a persistent surface created via
 * AMediaCodec_createPersistentInputSurface()
 * This can only be called after the codec has been configured by calling
 * AMediaCodec_configure(..); and before AMediaCodec_start() has been called.
 *
 * For more details, see the Java documentation for MediaCodec.setInputSurface.
 *
 * Available since API level 26.
 */
media_status_t AMediaCodec_setInputSurface(
        AMediaCodec *mData, ANativeWindow *surface) __INTRODUCED_IN(26);

/**
 * Signal additional parameters to the codec instance.
 *
 * Parameters can be communicated only when the codec is running, i.e
 * after AMediaCodec_start() has been called.
 *
 * NOTE: Some of these parameter changes may silently fail to apply.
 *
 * Available since API level 26.
 */
media_status_t AMediaCodec_setParameters(
        AMediaCodec *mData, const AMediaFormat* params) __INTRODUCED_IN(26);

/**
 * Signals end-of-stream on input. Equivalent to submitting an empty buffer with
 * AMEDIACODEC_BUFFER_FLAG_END_OF_STREAM set.
 *
 * Returns AMEDIA_ERROR_INVALID_OPERATION when used with an encoder not in executing state
 * or not receiving input from a Surface created by AMediaCodec_createInputSurface or
 * AMediaCodec_createPersistentInputSurface.
 *
 * Returns the previous codec error if one exists.
 *
 * Returns AMEDIA_OK when completed succesfully.
 *
 * For more details, see the Java documentation for MediaCodec.signalEndOfInputStream.
 *
 * Available since API level 26.
 */
media_status_t AMediaCodec_signalEndOfInputStream(AMediaCodec *mData) __INTRODUCED_IN(26);

/**
 * Get format of the buffer. The specified buffer index must have been previously obtained from
 * dequeueOutputBuffer.
 * The caller must free the returned format.
 *
 * Available since API level 28.
 */
AMediaFormat* AMediaCodec_getBufferFormat(AMediaCodec*, size_t index) __INTRODUCED_IN(28);

/**
 * Get the component name. If the codec was created by createDecoderByType
 * or createEncoderByType, what component is chosen is not known beforehand.
 * Caller shall call AMediaCodec_releaseName to free the returned pointer.
 *
 * Available since API level 28.
 */
media_status_t AMediaCodec_getName(AMediaCodec*, char** out_name) __INTRODUCED_IN(28);

/**
 * Free the memory pointed by name which is returned by AMediaCodec_getName.
 *
 * Available since API level 28.
 */
void AMediaCodec_releaseName(AMediaCodec*, char* name) __INTRODUCED_IN(28);

/**
 * Set an asynchronous callback for actionable AMediaCodec events.
 * When asynchronous callback is enabled, it is an error for the client to call
 * AMediaCodec_getInputBuffers(), AMediaCodec_getOutputBuffers(),
 * AMediaCodec_dequeueInputBuffer() or AMediaCodec_dequeueOutputBuffer().
 *
 * AMediaCodec_flush() behaves differently in asynchronous mode.
 * After calling AMediaCodec_flush(), the client must call AMediaCodec_start() to
 * "resume" receiving input buffers. Even if the client does not receive
 * AMediaCodecOnAsyncInputAvailable callbacks from video encoders configured
 * with an input surface, the client still needs to call AMediaCodec_start()
 * to resume the input surface to send buffers to the encoders.
 *
 * When called with null callback, this method unregisters any previously set callback.
 *
 * Refer to the definition of AMediaCodecOnAsyncNotifyCallback on how each
 * callback function is called and what are specified.
 * The specified userdata is opaque data which will be passed along
 * when the callback functions are called. MediaCodec does not look at or alter the
 * value of userdata. Often it is a pointer to a client-owned object,
 * and client manages the lifecycle of the object in that case.
 *
 * Once the callback is unregistered or the codec is reset / released, the
 * previously registered callback will not be called.
 *
 * All callbacks are fired on one NDK internal thread.
 * AMediaCodec_setAsyncNotifyCallback should not be called on the callback thread.
 * No heavy duty task should be performed on callback thread.
 *
 * Available since API level 28.
 */
media_status_t AMediaCodec_setAsyncNotifyCallback(
        AMediaCodec*,
        AMediaCodecOnAsyncNotifyCallback callback,
        void *userdata) __INTRODUCED_IN(28);

/**
 * Registers a callback to be invoked when an output frame is rendered on the output surface.
 *
 * This method can be called in any codec state, but will only have an effect in the
 * Executing state for codecs that render buffers to the output surface.
 *
 * This callback is for informational purposes only: to get precise
 * render timing samples, and can be significantly delayed and batched. Some frames may have
 * been rendered even if there was no callback generated.
 *
 * When called with null callback, this method unregisters any previously set callback.
 *
 * Refer to the definition of AMediaCodecOnFrameRendered on how each
 * callback function is called and what are specified.
 * The specified userdata is opaque data which will be passed along
 * when the callback functions are called. MediaCodec does not look at or alter the
 * value of userdata. Often it is a pointer to a client-owned object,
 * and client manages the lifecycle of the object in that case.
 *
 * Once the callback is unregistered or the codec is reset / released, the
 * previously registered callback will not be called.
 *
 * All callbacks are fired on one NDK internal thread.
 * AMediaCodec_setOnFrameRenderedCallback should not be called on the callback thread.
 * No heavy duty task should be performed on callback thread.
 *
 * Available since Android T.
 */
media_status_t AMediaCodec_setOnFrameRenderedCallback(
        AMediaCodec*,
        AMediaCodecOnFrameRendered callback,
        void *userdata) __INTRODUCED_IN(__ANDROID_API_T__);

/**
 * Release the crypto if applicable.
 *
 * Available since API level 28.
 */
media_status_t AMediaCodec_releaseCrypto(AMediaCodec*) __INTRODUCED_IN(28);

/**
 * Call this after AMediaCodec_configure() returns successfully to get the input
 * format accepted by the codec. Do this to determine what optional configuration
 * parameters were supported by the codec.
 * The caller must free the returned format.
 *
 * Available since API level 28.
 */
AMediaFormat* AMediaCodec_getInputFormat(AMediaCodec*) __INTRODUCED_IN(28);

/**
 * Returns true if the codec cannot proceed further, but can be recovered by stopping,
 * configuring, and starting again.
 *
 * Available since API level 28.
 */
bool AMediaCodecActionCode_isRecoverable(int32_t actionCode) __INTRODUCED_IN(28);

/**
 * Returns true if the codec error is a transient issue, perhaps due to
 * resource constraints, and that the method (or encoding/decoding) may be
 * retried at a later time.
 *
 * Available since API level 28.
 */
bool AMediaCodecActionCode_isTransient(int32_t actionCode) __INTRODUCED_IN(28);

typedef enum {
    AMEDIACODECRYPTOINFO_MODE_CLEAR = 0,
    AMEDIACODECRYPTOINFO_MODE_AES_CTR = 1,
    AMEDIACODECRYPTOINFO_MODE_AES_WV = 2,
    AMEDIACODECRYPTOINFO_MODE_AES_CBC = 3
} cryptoinfo_mode_t;

typedef struct {
    int32_t encryptBlocks;
    int32_t skipBlocks;
} cryptoinfo_pattern_t;

/**
 * Create an AMediaCodecCryptoInfo from scratch. Use this if you need to use custom
 * crypto info, rather than one obtained from AMediaExtractor.
 *
 * AMediaCodecCryptoInfo describes the structure of an (at least
 * partially) encrypted input sample.
 * A buffer's data is considered to be partitioned into "subsamples",
 * each subsample starts with a (potentially empty) run of plain,
 * unencrypted bytes followed by a (also potentially empty) run of
 * encrypted bytes.
 * numBytesOfClearData can be null to indicate that all data is encrypted.
 * This information encapsulates per-sample metadata as outlined in
 * ISO/IEC FDIS 23001-7:2011 "Common encryption in ISO base media file format files".
 *
 * Available since API level 21.
 */
AMediaCodecCryptoInfo *AMediaCodecCryptoInfo_new(
        int numsubsamples,
        uint8_t key[16],
        uint8_t iv[16],
        cryptoinfo_mode_t mode,
        size_t *clearbytes,
        size_t *encryptedbytes) __INTRODUCED_IN(21);

/**
 * Delete an AMediaCodecCryptoInfo created previously with AMediaCodecCryptoInfo_new, or
 * obtained from AMediaExtractor.
 *
 * Available since API level 21.
 */
media_status_t AMediaCodecCryptoInfo_delete(AMediaCodecCryptoInfo*) __INTRODUCED_IN(21);

/**
 * Set the crypto pattern on an AMediaCryptoInfo object.
 *
 * Available since API level 21.
 */
void AMediaCodecCryptoInfo_setPattern(
        AMediaCodecCryptoInfo *info,
        cryptoinfo_pattern_t *pattern) __INTRODUCED_IN(21);

/**
 * The number of subsamples that make up the buffer's contents.
 *
 * Available since API level 21.
 */
size_t AMediaCodecCryptoInfo_getNumSubSamples(AMediaCodecCryptoInfo*) __INTRODUCED_IN(21);

/**
 * A 16-byte opaque key.
 *
 * Available since API level 21.
 */
media_status_t AMediaCodecCryptoInfo_getKey(AMediaCodecCryptoInfo*, uint8_t *dst) __INTRODUCED_IN(21);

/**
 * A 16-byte initialization vector.
 *
 * Available since API level 21.
 */
media_status_t AMediaCodecCryptoInfo_getIV(AMediaCodecCryptoInfo*, uint8_t *dst) __INTRODUCED_IN(21);

/**
 * The type of encryption that has been applied,
 * one of AMEDIACODECRYPTOINFO_MODE_CLEAR or AMEDIACODECRYPTOINFO_MODE_AES_CTR.
 *
 * Available since API level 21.
 */
cryptoinfo_mode_t AMediaCodecCryptoInfo_getMode(AMediaCodecCryptoInfo*) __INTRODUCED_IN(21);

/**
 * The number of leading unencrypted bytes in each subsample.
 *
 * Available since API level 21.
 */
media_status_t AMediaCodecCryptoInfo_getClearBytes(AMediaCodecCryptoInfo*, size_t *dst) __INTRODUCED_IN(21);

/**
 * The number of trailing encrypted bytes in each subsample.
 *
 * Available since API level 21.
 */
media_status_t AMediaCodecCryptoInfo_getEncryptedBytes(AMediaCodecCryptoInfo*, size_t *dst) __INTRODUCED_IN(21);

extern const char* AMEDIACODEC_KEY_HDR10_PLUS_INFO __INTRODUCED_IN(31);
extern const char* AMEDIACODEC_KEY_LOW_LATENCY __INTRODUCED_IN(31);
extern const char* AMEDIACODEC_KEY_OFFSET_TIME __INTRODUCED_IN(31);
extern const char* AMEDIACODEC_KEY_REQUEST_SYNC_FRAME __INTRODUCED_IN(31);
extern const char* AMEDIACODEC_KEY_SUSPEND __INTRODUCED_IN(31);
extern const char* AMEDIACODEC_KEY_SUSPEND_TIME __INTRODUCED_IN(31);
extern const char* AMEDIACODEC_KEY_VIDEO_BITRATE __INTRODUCED_IN(31);

__END_DECLS

#endif //_NDK_MEDIA_CODEC_H

/** @} */